ID Tech BT Mag Swiper - Pairing and Setup

Modified on Fri, 17 Jan at 3:32 PM

Power on/off Device
- Press the round power button and hold for 5 seconds
- The green light will flash 3 times confirming power on or off
Pairing with iPad
- Follow the previous step to power on the BT Swiper.
- If the blue light flashes on once every 5 seconds this means you are NOT in pairing mode. To enter pairing mode tap the power button 1 time. This will cause the blue light to flash on and off every second indicating “pairing mode” is now active.
- On your iPad navigate to Settings > Bluetooth > Click BT MAG to pair devices device (see screenshot below)
Battery and Maintenance
- The battery will last 4 hours with active use (10 swipes per hour)
- The battery will last 8 hours with less active use(less than 10 swipes per hour)
- If powered off the device will automatically pair once powered back on
Connecting BT Mag reader to MyTime
- After connecting your reader to Bluetooth you will need to also connect your reader with the MyTime app
- Begin by opening the MyTime app and processing any service or product transaction via credit card. After clicking + credit card in the MyTime app, make sure you select the ID TECH BT Mag from the list of entry methods (see Exhibit 2 screenshot below)
- For a step-by-step guide on connecting your reader to MyTime see our Help Center article here.